Metrology & Gauging

 

   

CLASSIC digital pocket caliper

Measuring range 0 - 150 mm

 

Model# 816511

PDF Inquire about this product Learn more
FINO digital caliper

Measuring range 0 - 150 mm

 

Model# 841715

PDF Inquire about this product Learn more
FLAT digital caliper

Measuring range 0 - 150 mm

 

Model# 846501

PDF Inquire about this product Learn more
Digital VARIO caliper

Measuring range:

 

Model# 842020 0 - 200 mm.

Model# 842030 0 - 300 mm.

Model# 842050 0 - 500 mm.

PDF Inquire about this product Learn more
Digital WORKSHOP caliper

Measuring range: 

 

Model# 816533 0-300 mm,

Model # 816535 0-500 mm. 

Model# 816566 0-1000 mm.

PDF Inquire about this product Learn more
Digital WORKSHOP caliper (large)

Measuring range:

 

Model # 816567 1000-1500 mm.

Model # 816568 1500-2000 mm.

PDF Inquire about this product Learn more
Internal Taper Gauge (IKT/IKT-OS/IKT-ID)

The Diatest internal taper gauge measures the largest diameter of a conical bore or a conical keyway. An IKT replaces previous slower and more expensive gauging methods.

 

Principle: Introduce the tapered plunger into the hole or slot and press the gauge firmly and evenly against the surface of the part. The measured value can be read off clearly from the special indicator.
PDF Inquire about this product Learn more
External Taper Gauge (AKT)

The Diatest AKT measures the smallest diameter of an external cone.

 

Principle: Put the tapered plunger over external cone to be measured and press the gauge firmly and evenly against the surface of the part. The measured value can be read off clearly from the special indicator.
PDF Inquire about this product Learn more
Chamfer Gauge (KT/KT-B)

The Diatest chamfer gauge measures directly a 45° chamfer on rectangular and cylindrical work pieces, even bores and slots.  For other angles of chamfer the gauge can be used as a comparative - gauge (no 1:1 reading).  Radii can be measured using a calculation formula (no 1:1 reading)

 

Principle: Press the gauge firmly with the two jars at the surface of work piece. In case of 45° chamfers the value can be read directly at the indicator.

PDF Inquire about this product Learn more
Digital depth gauge - Standard

Measuring range 0 - 200 mm, 0-400 mm

 

Model# 816552

PDF Inquire about this product Learn more
Digital depth gauge - Turning Dept.

Measuring range 0 - 170 mm

 

Model# 816541

PDF Inquire about this product Learn more
Digital depth gauge - Universal

Measuring range 0 - 200 mm, 0 - 400 mm

 

Model# 841121

PDF Inquire about this product Learn more
Digital depth gauge - Vario

Measuring range 0 - 200 mm, 0 - 400 mm

 

Model# 841120

PDF Inquire about this product Learn more
Forward Dial Indicator

Forward brand precision dial gauges are manufactured in Germany to the highest design and quality standards. 

 

Standard 8mm stem or other sizes available. Resolution to .001 or .0001 increments. Tip pressure either 150n or 200n.

Inquire about this product Learn more
External Gear Gauge AV (closed ring)
Diatest External Gear Gauges (pictured left): Measure range over balls: Ma=0 - 140 mm. (closed ring)  Checking of measuring size between or over balls. Detecting of conicity and ovality.
 
Applicable for internal and external gear gauges (straight-sided or helical) and for gears with even or odd numbered teeth.
PDF Inquire about this product Learn more
External Gear Gauge EG (open)
Diatest External Gear Gauges: range over balls: Ma=0 - 140 mm. (open version)  Checking of measuring size between or over balls. Detecting of conicity and ovality.
 
Applicable for internal and external gear gauges (straight-sided or helical) and for gears with even or odd numbered teeth.
PDF Inquire about this product Learn more
Internal Gear Gauge (IV)

Diatest Internal Gear Gauges: Measure range between balls: Mi=3.5 to 333 mm.  Checking of measuring size between balls. Detecting of conicity and ovality.

 

Applicable for internal and external gear gauges (straight-sided or helical) and for gears with even or odd numbered teeth.

 
Order tip: For inquiries please always state the dimension between balls (Mi) and the ball diameter. In certain cases it may be advisable to provide a sample component.
PDF Inquire about this product Learn more
External micrometers

Click Learn more for all models

PDF Inquire about this product Learn more
External thread micrometer
  • Reading 0.01 mm
  • Thread pitch 0.5 mm
  • By model Ø 3.5 x 15 mm
  • Spindle range 25 mm
PDF Inquire about this product Learn more
Depth micrometer
  • Reading 0,01 mm
  • Thread pitch 0,5 mm
  • Hardened measuring Ø 3 mm
  • Spindle range 25 mm
  • Length of bridge 100 mm
PDF Inquire about this product Learn more
Internal micrometer

Measuring range 25 or 50 mm. 0,01 or 0,02 mm thimble graduation. Precision micrometer for the internal measuring of large diameters. The various measuring ranges are achieved by screwing together the precision lapped extensions.

PDF Inquire about this product Learn more
Crankshaft Gauge

The DIATEST Crankshaft gauge is applicable for checking crankshafts and crankshaft bearings of motors for ships, cars, trucks etc.  Also in departments for grinding crankshafts, repair of crankshafts and especially for checking of motors or compressors in situ.

 
Sturdy in design and furnished with hardened gauging points.  Ideally suited to rugged working conditions.
PDF Inquire about this product Learn more
Plug Gauge

Diatest Plug gauges (BMD) are self-indicating, self-centering, highprecision measurement instruments. These easy-to-use gauges are suitable for both static and dynamic measurements. They can be used for manual detection of dimensional deviations and shape defects errors in bores in serial measurement at the machine but may also be installed in measuring equipment and automated systems.

PDF Inquire about this product Learn more
Plunger Probe

Apart from checking the diameter Diatest large bore gauges can detect shape deviations of the bore such as conical form, barrel shape, out of- roundness etc. Also, plunger probes can be used for gauging parallel distances.  Plunger probes are produced as standard also in blind bore style (FB).

 

Features include easy handling, adaptability to most bore gauging applications and large measuring ranges.

PDF Inquire about this product Learn more
Split-Ball Probe

Universal bore gauges for indicating internal measurements. The modular design with extensive accessories enables gauging of most common bores. This allows use for serial and individual control as well as preferentially in the plant directly at the production machine. Due to different styles through bores, blind bores, parallel distances, etc. can be gauged.

PDF Inquire about this product Learn more
TD-Gauge+

The DIATEST TD-Gauge+ allows the simultaneous gauging of thread depth and detecting of No-Go gauges.

PDF Inquire about this product Learn more
TD-Gauge+ Digital

The digital display allows to transfer the depth readings to a computer by means of a data cable (OPTO-USB, OPTO-RS232) or via a transmitter module (MDU-OPTO-S). The advantage of the radio transmission is the free scope which is limited by the cable length when using the data cable.

PDF Inquire about this product Learn more
Diatron1000

The DIATRON1000 is the flagship of a new generation of DIATEST measuring instruments of extreme high precision combined with flexible and safe data transmission.

 

 

A complete and very flexible measuring system for internal and external measurement with integrated precision seven-digit-display.

PDF Inquire about this product Learn more
Diatron2200

The DIATEST DIATRON2200 is an electronic column with 3-colour bar scale (red, green, yellow and digital display of measured data.

 

Measured data can be transferred to the column via real radio transmission provided that an appropriate receiving module is applied. 

PDF Inquire about this product Learn more
Diatron6000

The DIATEST DIATRON6000 is an SPC-capable display unit with analogue and digital display. Measured data can be transferred via real radio transmission to the DIATRON provided that a relating receiving module is fitted. 

PDF Inquire about this product Learn more
DIA-COMEC2

You can measure internal and external diameters as well as gear gauges. Due to its sturdy construction and easy handling, the Diatest measuring table fits perfectly for use in workshops.

PDF Inquire about this product Learn more
DIA-COMEC2 AL

You can measure internal and external diameters as well as gear gauges. Due to its sturdy construction and easy handling, the Diatest measuring table fits perfectly for use in workshops.

PDF Inquire about this product Learn more
DIA-COMEC2 JS

You can measure internal and external diameters as well as gear gauges. Due to its sturdy construction and easy handling, the Diatest measuring table fits perfectly for use in workshops.

PDF Inquire about this product Learn more
Checking stand MST58

Suitable for use with DIATEST bore gauges (e.g. split-ball probes) for serial measuring of small parts.  Also suitable in connection with special applications, favoured for use together with DIATEST floating holders.

PDF Inquire about this product Learn more
Universal stand MST102

Suitable for use with DIATEST bore gauges (e.g. split-ball probes) for serial measuring of small parts.  Also suitable in connection with special applications, favoured for use together with DIATEST floating holders.

PDF Inquire about this product Learn more
Mini fixture KM

Suitable for use with DIATEST bore gauges (e.g. split-ball probes) for serial measuring of small parts.  Also suitable in connection with special applications, favoured for use together with DIATEST floating holders.

PDF Inquire about this product Learn more
Floating Holder SHT

Floating holders compensate position errors.

 

SHT Floating holder especially suited for DIATEST split-ball probes.

PDF Inquire about this product Learn more
Floating Holders SH-BMD20/30/50

Models: SH-BMD20, SH-BMD30, SH-BMD50

 

Diatest Floating holders compensate position errors.

PDF Inquire about this product Learn more
Dial Indicators

Diatest Models:

 

  • MU1m/MU01Z
  • MU10m/MU1Z
  • Micro comparator (F1000)
  • MDU125
  • Analodig (ANA)
PDF Inquire about this product Learn more
Diawireless
DIAWIRELESS - wireless data transmission via real radio transmission or Bluetooth® to PC or DIATRON.
 
 
Both wireless solutions are adjusted to the DIATEST programme. Easy handling and the usual reliability of all DIATEST products are guaranteed Precision by Simplicity!
 
 
Click "Learn more" for details or click here for a visual guide
PDF Inquire about this product Learn more
Diacator

The Diatest DIACATOR is an instrument with a stationary indicator and a rotary probe for fast and accurate concentrical alignment of bores and shafts on most rotary machine tools.

 

Especially suitable for finding reference points on CNC machines.

PDF Inquire about this product Learn more
Dial Indicator Tester

A Diatest dial gauge calibration fixture for use with a digital length measuring probe with a minumum range of 10 mm or .4" and minimum accuracy of .001 mm or .000040" over that range.

 
Inspects accuracy and hysteresis (reversal error) in dial gauges.
PDF Inquire about this product Learn more
Offset Heads
Standardized Diatest components for various applications for assembly in measuring devices. 
 
  • Standard accessories for use in gauging fixtures
  • Wide range of applications, built-in holders for gauging fixtures, 90° attachments, extensions, rotary adaptors etc.
PDF Inquire about this product Learn more
Outside Diameter Gauge (AMG)

Diatest Measuring instrument for gauging outside diameters from 5 to 25 mm/0.2" to 1"

 

Click "Learn more" for product features or "PDF" for data sheet

PDF Inquire about this product Learn more
Outside Diameter Gauge (ODV)

Diatest Measuring instrument for gauging outside diameters between 12 and 82 mm/0.5" to 3.25"

 

Click Learn more for product features or "PDF" for data sheet

PDF Inquire about this product Learn more
Setting Ring Gauge (Company Standard)

According to company standard

 

Manufacturer: Diatest

Inquire about this product Learn more
Setting Ring Gauge (DIN-2250-C)

According to DIN2250-C

 

Manufacturer: Diatest

Inquire about this product Learn more
Aerosol container measurement

Manufacturer: Kroeplin

 

Pictured: Model# AE2105

PDF Inquire about this product Learn more
External measurement

Manufacturer: Kroeplin

 

Pictured: Model# C110

PDF Inquire about this product Learn more
Foamed material and foil measurement

Manufacturer: Kroeplin

 

Pictured: Model# C110T

Inquire about this product Learn more
Internal blind hole measurement

Manufacturer: Kroeplin

 

Pictured: Model# G2G30

Inquire about this product Learn more
Internal measurement

Manufacturer: Kroeplin

 

Pictured: Model# G102

PDF Inquire about this product Learn more
Tube wall thickness measurement

Manufacturer: Kroeplin

 

Pictured: Model# C1R10

Inquire about this product Learn more
Aerosol container measurement

Manufacturer: Kroeplin

 

Pictured: Model# A2105

PDF Inquire about this product Learn more
Dental gauges

Manufacturer: Kroeplin

 

Pictured: Model# E110D

PDF Inquire about this product Learn more
External measurement

Manufacturer: Kroeplin

 

Pictured: Model# D110

PDF Inquire about this product Learn more
Foamed material and foil measurement

Manufacturer: Kroeplin

 

Pictured: Model# D110T

Inquire about this product Learn more
Internal blind hole measurement

Manufacturer: Kroeplin

 

Pictured: Model# H2G20

Inquire about this product Learn more
Internal comparison

Manufacturer: Kroeplin

 

Pictured: Model# H2M50

Inquire about this product Learn more
Internal measurement

Manufacturer: Kroeplin

 

Pictured: Model# H102

PDF Inquire about this product Learn more
Tube wall thickness measurement

Manufacturer: Kroeplin

 

Pictured: Model# D1R10

Inquire about this product Learn more

Visit Us

Forward Precision Tools & Machinery
 

1775 Meyerside Drive, Unit 1
Mississauga, ON, Canada, L5T1E2.

 

Open Monday-Friday from 8am-5pm

Contact Us

Telephone: 905-696-8582
Toll free: 1-800-668-4803
Fax: 905-696-8835
E-mail: info@forwardprecision.com

Legal

Terms & Conditions
Copyright © 2013 Forward Precision Tools & Machinery.
www.forwardprecision.com